CoolMax ATX 24Pin LCD Power Supply Tester with PCIe connector (RoHS Compliant) - Model#PS-228 - Retail
Rebate: Buy 1 item, Get $1.00 rebate
|Type||ATX 24 Pin|
|Description||Power Supply Tester with LCD|
|Features||Easy to check ATX power supply |
Accurate voltage indicator +/- 0.1V (+12V1/+5V/+3.3V/5VSB/+12V2/-12V)
ATX P.G. value display
Lower or higher P.G. values alarm
ATX output connectors check
Lower voltage detected alarm
Over voltage alarm
No voltage detected alarm
|Manual||Plug-in your ATX power 24 pin and plug-in (P4/P6/P8) into the tester. |
Turn on your ATX power supply
LCD shows each voltage and P.G. value on the screen automatic and you can hear 2 beep sounds.
ATX power output connector checking one by one.
If power output is working, the LED will light on.
If power output failed, the LED will not light on.
Plug-in (HDD/Floppy) connector and check LED light (+12V1/+5V)
Plug-in SATA connector and check LED light (+12V1/+5V+3.3V)
Remove the connector after your checking
Do not plug-in 2 connectors into the tester at the same time
(Not include 24 pin connector)
Abnormal voltage detected will not display on the screen.
No voltage detect, “LL” will display on the screen.
When detected Voltage is lower than Min. Value, “LL” will display on the screen.
When detected Voltage is higher than Max. Value, “HH” will display on the screen.
When detected voltage is lower than table value (A), will alarm.
When detected voltage is higher than table value (B), will alarm.
P.G. value detected lower 100ms or higher 900ms, P.G. value is abnormal and alarm.
When abnormal happened, it will alarm and relative digit blink on the screen.